Manual Plate Vulcanizing Machine

XL-8122B Manual Plate Vulcanizing Machine

Overview:

Manual Plate Vulcanizing Machine is suitable for use in industries such as rubber materials, plastic materials, pigments, ink materials, and chemical raw materials.

This machine clamps the mold block between two plates, places the raw material into the square hole of the mold, and clamps it between the electrically heated plates of the machine. Pressure and temperature are applied to shape the raw material for testing, serving as a basis for laboratory inspection and large-scale production formulation in factories.

Manual Plate Vulcanizing Machine has upper and lower heating plates. The sample is clamped between the two plates, and heat is transferred to the sample through heating. A certain pressure is then applied to shape the sample, achieving a specific thickness and size.

Technical Parameters:

Capacity selection: Standard 20 ton.

Temperature: Room temperature ~ 300°C, adjustable (upper mold, lower mold).

Timer: Electronic type, 0~9999 minutes, adjustable. 

Heating time: < 8 minutes, at 200°C, PVC pellets (other materials, controlled according to actual conditions).

Pressure: Approximately 250 kg/cm²

Heating plate area: 210 x 220 mm (upper mold, lower mold).

Heating plate spacing: 0 ~ 100 mm (factory spacing: 45 mm).

Mold square hole: 125 x 150 mm (customizable for special requirements).

Mold thickness: 1.0 mm/3 pieces (customizable for special requirements).

Heating power: Approximately 7A / 2100W for upper and lower molds.

Power supply: 1∮, AC220V, approximately 12A.

Overall dimensions: Approximately 120(H) × 40(W) × 35(D) cm.

The temperature of the manual plate vulcanizing machine can be preset, maintaining a constant set temperature, and it features automatic temperature compensation.

Our company also produces electric plate vulcanizing machines, water-cooled and air-cooled plate vulcanizing machines.